OEM ABS 3D printing Manufacturers, Company & Solution Provider

ABS 3D printing company

3D printers have multiple internal components working simultaneously during the printing process, and any problems with the print head, extrusion system or hot-end components can cause problems in the middle of the printing process. Therefore, when preparing and slicing 3D models, special attention needs to be paid to the potential impact of print settings, hardware and material specifications on 3D printed models.

+86-13486055248 Contact Us

Description
Additional Information
Feedback

ABS 3D Printing Company

ABS 3D Printing Company
3D Printing Process	SLA / SLS /FDM /SLM /DLP /MJF
Materials Available- Plastic	Abs resin / Nylon /PMMA ect.....
Materials Available-Metal	SUS 316L /Aluminum alloy Alsi 10Mg /Titanium alloy Ti64 /Die steel 18Ni300 ect.
Drawing Formats	> SolidWorks (.sldprt)> ProE (.prt)> IGES (.igs)> STEP (.stp)> Parasolid (.x_t)> .stl

METAL 3D PRINTING - SLM / DMLS

The two technologies have many similarities: both use laser scanning and selectively fuse (or melt) metal powder particles, glue them together and build them layer by layer. Similarly, the materials used in both processes are granular metals.
The difference between SLM and DMLS is due to the basis (and patents) of the particle bonding process: SLM uses metal powder with a single melting temperature and completely melts the particles, while in DMLS, the powder is composed of materials with variable melting points at high temperatures Fusion at the molecular level.
Bering 3D provides 3D printing services for various metal materials such as stainless steel, die steel, titanium alloy, aluminum alloy, and bronze.

SELECTIVE LASER SINTERING - SLS

In the printing process of the SLS equipment, a high-power laser is used to fuse small particles of plastic powder into the required three-dimensional shape. The laser selectively fuse powder materials by scanning the three-dimensional data section on the surface of the powder bed. After scanning each section, the powder bed is reduced by a layer of thickness, a new layer of material is added to it, and the selective laser sintering process is repeated until the part is completed.
SLS 3D printing can be used not only for the prototype design of functional polymer components, but also for small production runs because it has high design freedom, high precision, and produces parts with good and consistent mechanical properties.

STEREO LIGHT CURING MOLDING - SLA

It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.